I have just sent them to the parts store and they would match them up for me. That is how i got them the last time. I will change them when i replace the alt.

Was thinking then the miss was not bad enough to show up till under a really heavy load.. something elas is the coil being bad. Have had a a/c coil go bad and be making the coumputer to off the wall stuff.

i would cut for a miss that is not that bad untill the ac is on

All fixed thanks for the imput.

found then the shaft that the exhaust rockers ride on had truned so then they where not getting any oil. Got the new parts on order...

Ok got it all apart and took off the valve cover and then put the rest back together and ran it . Found then all the exhaust rockers was making noise and then i did not have oil coming out of them. The intake was shouting it out.Any one seen this before. The car has 5w-30 in it and it calles for 10-...

Going to be working on it today so will let u know. And it does make the noise all the time. Going to try some of this stuff. Thanks alot. Went on to some dodge forums and people are saying they have spend a ton of money at dealer for this kind of noise. That was at the dealer. Will let u know what ...

how do u tell witch one need replaced

Yea and they would break all the time. Hell i still have one in my tool box.LOL

when i had it all apart i did see then the cam had some wear on some lobes. This is a over head cam motor and dont really have lifters. I was thinking the frist time i toke it apart it would be a bad rocker. But when i looked at all of them they looked fine. It does have little like tappers in the r...

Have one of thesecome in with what sounds like upper end noise about like a bad lifter. Have had the top end apart and could not find anything. When i put it back togetther the noise was gone. But it came back a few days latter. Have read some stuff online about this where people had to replace moto...

it was a whole side they are mounted on a base.

bad sensor ring in tranny

can u get a oil filter with one in it.

I have had rockers brake on them and the 4.5

yea i am with him i have put in a lot of switches.

Got to look at the car some more today and found then the qurd driver in the computer is what was going out.Checked out more and found then the A/C coil was going right to ground. I feel so dumb!!!!!!!!

Ok will put in a control mod and that did nothing. Here is the thing the computer that was in the car is for a 82 S/N 1225610. Put one in and car left for about a week. Came back and when i put my scanor on it the coolant temp in going up and down at all times. And i have no tps so replaced it again...

how

Ok have checks and cleaned all grounds. Got 1.0 ohms at computer. It is getting worse as i look at this thing. The sparyfrom the inj is not good but if i trigger it my self it is good. Fuel pump flow is good. Checked wire from computer to inj and it is good. Has anyone seen a control mod do this.