Model of Vehicle truncated on Vehicle Selection screen

Manager SE specific technical issues
Post Reply
GUTHTIRE
400 Club: Mega-Star Contributor
400 Club: Mega-Star Contributor
Posts: 467
Joined: Thu Dec 10, 2015 5:19 am
Location: Glenmoore, PA
Contact:

Model of Vehicle truncated on Vehicle Selection screen

Post by GUTHTIRE »

Is anyone else seeing the vehicle model being truncated when scheduling?
Scenario:
1. Right-click in the Schedule and choose New Appointment
2. Enter a customer name (if you have multiple customers with the same lastname select one of them)
3. In the Vehicle Selection screen the Model listed is truncated, ex. we see "Cherokee" whereas the vehicle is clearly listed as "Cherokee Limited" on the Customer tab.

It's not a show stopper but it's a bit confusing when you have a customer with multiple Jeep's.
Dan
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4457
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Model of Vehicle truncated on Vehicle Selection screen

Post by timbre4 »

GUTHTIRE wrote:
Wed Mar 08, 2023 11:43 am
Is anyone else seeing the vehicle model being truncated when scheduling?
Scenario:
1. Right-click in the Schedule and choose New Appointment
2. Enter a customer name (if you have multiple customers with the same lastname select one of them)
3. In the Vehicle Selection screen the Model listed is truncated, ex. we see "Cherokee" whereas the vehicle is clearly listed as "Cherokee Limited" on the Customer tab.

It's not a show stopper but it's a bit confusing when you have a customer with multiple Jeep's.
I see it; it's not truncated but it's ailing to include the Jeep sub-model on Vehicle Selection screen. I tried a few models towards establishing a pattern. Thanks for spotting this.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
Silky7
System Guru / Moderator
System Guru / Moderator
Posts: 1035
Joined: Mon Dec 31, 2007 10:07 am

Re: Model of Vehicle truncated on Vehicle Selection screen

Post by Silky7 »

*Edit*

Nevermind. Tim got it. I was thinking you had the column too small; sounds like it's submodel/trim display instead.
M1 Product Manager
Post Reply

Return to “Technical Issues”