Page 1 of 1
2000 P/T Cruiser TCM Location
Posted: Wed Jan 06, 2010 7:45 am
by wbuxton
Does anyone have a picture of the location of the TCM or EATC module (transmission) Mitchell says left front of engine compartment but I can't locate this one.
Build date 11/2000
Re: 2000 P/T Cruiser TCM location
Posted: Wed Jan 06, 2010 7:54 am
by ricmorin
wbuxton wrote:Does anyone have a picture of the location of the TCM or EATC module (transmission) Mitchell says left front of engine compartment but I can't locate this one.
Build date 11/2000
Check your email. Picture sent.
Re: 2000 P/T Cruiser TCM location
Posted: Wed Jan 06, 2010 7:55 am
by ricmorin
You take the LF wheel and wheel well off and it's bolted to the outside of the frame rail.
Re: 2000 P/T Cruiser TCM Location
Posted: Wed Jan 06, 2010 8:53 am
by wbuxton
Much thanks, wheel well in my thinkig is outside the engine compartment.
Re: 2000 P/T Cruiser TCM Location
Posted: Wed Jan 06, 2010 9:04 am
by ricmorin
Well, it's close. And it IS LF.
Chrysler always puts these things in the most inhospitable places.
Re: 2000 P/T Cruiser TCM Location
Posted: Wed Jan 06, 2010 9:19 am
by wbuxton
I found the picture in Mitchell finally. I was looking under "module location" figure 1-4 are listed. If you go to "transmission-automatic-locations" scroll down to fig 10 it is shown there with a picture.
Re: 2000 P/T Cruiser TCM Location
Posted: Wed Jan 06, 2010 9:40 am
by timbre4
Was going to report this then noticed that you submitted it by email to M1 like the true scout that you are.
