Hello,
We found an error today. On the 2002 Kia Optima 2.4 engine torque spec for installing a cylinder head (without replacing head bolts) they list step 1 as tighten to 2Nm (20kg.m, 0.14lb ft) The decimal is in the wrong place - should be 14lb ft.
2002 Kia Optima 2.4L ENG - Torque Spec Correction
- rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
2002 Kia Optima 2.4L ENG - Torque Spec Correction
A year from now you will wish you had started TODAY ~ Karen Lamb
- timbre4
- System Guru / Moderator
- Posts: 4476
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction
Thanks for letting us know. Did you by chance enter it in FEEDBACK? If so, they already have this in editorial.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction
I did not enter it in feedback, I will look for that next time we see a problem.
Thanks
Thanks
A year from now you will wish you had started TODAY ~ Karen Lamb
- timbre4
- System Guru / Moderator
- Posts: 4476
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction
Thanks, I forwarded this one to editorial.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer