here is what we got great ideas with water pump and radiator we thinking same try one or the other however customer came in with a forum he read describing his car 2 a T and the gentle man that wrote it gave an explination and a bandaid remedy drill 2 hole in the thermostat pressure disc allowing co...

car came to shop with over heat problem test drove on highway no problem with temp. installed thermostat thought maybe sticking. customer picked up car, came back, same problem. got more of story; driving 50-55 under most load, temp guage would climb to hot, they would accelerate to 60-65 temp come ...

need some help, pulling hair out. ran throught trouble tree on this code, said replace transfer case control module. replaced, had programmed, came back with same code. rechecked wiring again, all checked fine. had a donor encoder and motor that work from scrap case installed just for giggles. not p...

1GNDT13W21K223538 - this blazer came in with intake leaking coolant. Replaced gaskets and distributor making noise replaced whole distrbutor. Test drove, went good. customer took over weekend and brought back on monday saying tach jumping up and down over 2000 rpm. code was stored for crack sensor c...

by passed the basics again was just low on freon charged and died works good
thanks for the help

This vehicle came in with Drivers side air warmer than passanger side. This car is a manual HVAC system one zone not a dual zone. Watched temp door acuator moving good and closing all the way watched door acuator for def, vent, etc. even removed moving good and all operations seem normal. No codes s...

Have taken the steps 2 checking the coolant sensor for leaking looks good. Removed ECM from enclosed box. Checked conections for coolant and oil no immediate signs. Also hooked lab scope to both cam sensors each has a good wave form at ecm and checked crank sensor for signal at ECM good wave form cr...

sorry for delay on posting fix Replaced pcm and had programed fixed problem back on road Car was pulled into shop with a start and die symptom. Pulled codes found P0321 ignition not receiving rpm signal. Checked RPM sensor for resisitance check ok checked pickup wheel seems to be in tack with what u...

can not see any rub marks on old sensor or new won
will have to check the tolerances on trust bearing play

Our shop has a 2003 Excursion (1fmsu43p3eb56232 6.0L) with crank sensor and cam sensor codes set when cranking engine; will start on occaision. Not a diesel shop, customer has had it to ford dealers not able to find anything. We installed new Cam sensor, drove away, month later comeback with same is...