Search found 28 matches
- Fri Nov 18, 2016 7:54 pm
- Forum: Imports - Other
- Topic: 2007 BMW 530I - Brake Light On
- Replies: 3
- Views: 3225
Re: 2007 BMW 530I - Brake Light On
Thanks. We had already tried to reset. We had a defective sensor wire that wouldn't it to reset.
- Fri Nov 18, 2016 8:36 am
- Forum: Imports - Other
- Topic: 2007 BMW 530I - Brake Light On
- Replies: 3
- Views: 3225
2007 BMW 530I - Brake Light On
Brake light on dash is illuminated and replace front brake pads message is showing. Front pads and sensors were replaced, but cannot get the light and message to reset.
Help would be appreciated. Thanks
Help would be appreciated. Thanks
- Mon Dec 28, 2015 2:00 pm
- Forum: Dodge Trucks / Jeep
- Topic: 2004 DODGE RAM 1500 5.7 STALLING
- Replies: 6
- Views: 3967
2004 DODGE RAM 1500 5.7 STALLING
Engine stalls but will restart immediately. Has strong fire and good fuel pressure. There are no DTCs. Will run a short time (no more than a minute) before stalling again. Any suggestions would be appreciated. Thanks
- Tue Mar 04, 2014 6:52 am
- Forum: Imports - Other
- Topic: 2006 Mercedes C230 - Vacuum Leak
- Replies: 3
- Views: 3084
Re: 2006 Mercedes C230 - Vacuum Leak
Here are the pics.
- Tue Mar 04, 2014 6:49 am
- Forum: Imports - Other
- Topic: 2006 Mercedes C230 - Vacuum Leak
- Replies: 3
- Views: 3084
Re: 2006 Mercedes C230 - Vacuum Leak
THE MISSING part is the air diverter rotator in the front of the intake. Ad seen in pics. Hope it helps!
- Mon Mar 03, 2014 1:46 pm
- Forum: Imports - Other
- Topic: 2006 Mercedes C230 - Vacuum Leak
- Replies: 3
- Views: 3084
2006 Mercedes C230 - Vacuum Leak
Have a 2006 C230 that has an insert missing that covers a hole in the front of the intake. The insert controls the flappers inside the intake. Trying to find out what this part is called. We know the intake will have to be removed to replace it, just don't see any info in the repair manual. Thanks
- Sat Mar 23, 2013 6:50 am
- Forum: Ford Cars
- Topic: 1965 Ford Mustang - Loping @ Idle?
- Replies: 6
- Views: 4734
Re: 1965 Ford Mustang - Loping @ Idle?
No new cam. All original type parts. Let me redescribe the problem, instead of loping it's more a rough idle and erratic idle only when in drive or reverse. It's fine in park or nuetral and runs great once you give it gas and are moving. When you come to a stop or are turning the roughness re-appear...
- Wed Mar 20, 2013 1:14 pm
- Forum: Ford Cars
- Topic: 1965 Ford Mustang - Loping @ Idle?
- Replies: 6
- Views: 4734
1965 Ford Mustang - Loping @ Idle?
This engine has a new carburetor and distibutor and it's been tuned up. It runs great going down the road but has a rough idle and the engine lopes at idle. We've checked timing and it's dead on. Not sure where else to look.
Any suggestions?
Any suggestions?
- Tue Mar 19, 2013 9:26 am
- Forum: Ford Trucks
- Topic: 2002 Ford F250 - 7.3L M/T No Shift
- Replies: 3
- Views: 2894
2002 Ford F250 - 7.3L M/T No Shift
MANUAL TRANSMISSION WILL NOT SHIFT GEARS UNLESS ENGINE IS NOT RUNNING. WILL SHIFT INTO ANY GEAR AS LONG AS ENGINE IS OFF. IT PULLS IN ANY GEAR JUST WILL NOT SHIFT. IDEAS ON WHERE TO START.
- Tue Feb 12, 2013 5:40 am
- Forum: Ford Trucks
- Topic: 2005 Ford F150 - 4.6L Tremble At Idle After Warmup
- Replies: 8
- Views: 4766
Re: 2005 Ford F150 - 4.6L Tremble At Idle After Warmup
Engine mounts are good and no misfires on the counter
- Mon Feb 11, 2013 6:45 am
- Forum: Ford Trucks
- Topic: 2005 Ford F150 - 4.6L Tremble At Idle After Warmup
- Replies: 8
- Views: 4766
2005 Ford F150 - 4.6L Tremble At Idle After Warmup
Truck has 66k miles. Starts fine and idles fine until the engine gets warm and then you can feel a tremble in the seat. It also does this at approx. 45 to 50 mph after its warm. Dealership has cleaned the air intake system and reprogrammed the computer and there are no codes stored. Open to suggesti...
- Thu Jun 28, 2012 5:31 am
- Forum: Imports - Other
- Topic: 2008 Mercedes E320 - Proper Eng Oil Weight
- Replies: 6
- Views: 4059
2008 Mercedes E320 - Proper Eng Oil Weight
Changing oil on 2008 E320 diesel and cannot find what proper weight of oil to put in. Any help would be appreciated.
- Tue Nov 15, 2011 10:56 am
- Forum: Toyota / Lexus
- Topic: 1996 Toyota Tacoma - Error Msg For ECM?
- Replies: 6
- Views: 4663
1996 Toyota Tacoma - Error Msg For ECM?
NO IGNITION FIRE.
TRYING TO ACCESS ECM BUT KEEP GETTING AN ERROR MESSAGE ON SCAN TOOL. THINKING MAY HAVE A BAD ECM.
ANY IDEAS? THANKS
TRYING TO ACCESS ECM BUT KEEP GETTING AN ERROR MESSAGE ON SCAN TOOL. THINKING MAY HAVE A BAD ECM.
ANY IDEAS? THANKS
- Thu Jul 14, 2011 1:14 pm
- Forum: Toyota / Lexus
- Topic: 2002 Toyota Camry - CV Axle
- Replies: 10
- Views: 7224
2002 Toyota Camry - CV Axle
TRYING TO REPLACE DRIVER'S SIDE CV AXLE. CANNOT GET IT TO COME OUT. HAVE EVEN TRIED TAKING OUT PASSENGER SIDE AXLE AND KNOCKING IT OUT FROM THE PASSENGER SIDE. WHAT'S ANOTHER OPTION?
- Mon Apr 04, 2011 1:00 pm
- Forum: GM Trucks
- Topic: 2002 Olds Silhouette - No Start
- Replies: 3
- Views: 1952
2002 Olds Silhouette - No Start
This car will not start after it sits for an hour to an hour and a half. It will spin over and over. The warmer the temp is outside the longer it takes to start. Starts perfectly every morning and after sitting long enough during the day. The check engine light is not on, it has plenty of fuel press...
- Sat Feb 19, 2011 6:42 am
- Forum: Honda / Acura
- Topic: 2007 Honda CRV Instrument Panel Flickering
- Replies: 2
- Views: 2774
2007 Honda CRV Instrument Panel Flickering
CHECKED CHARGING SYSTEM. REPLACED BATTERY, ALTERNATOR GOOD. CAR RUNS GOOD. EVERTHING ELSE IS NORMAL
- Tue Nov 30, 2010 2:26 pm
- Forum: GM Cars
- Topic: 2002 Olds Silhouette - No Start
- Replies: 1
- Views: 1431
2002 Olds Silhouette - No Start
Will not start for 30 minutes to 50 minutes after engine has been turned off for 30 minutes to an hour. This condition is intermitent. Sometimes it starts fine after sitting for a short time. Has spark and fuel pressure and at some point during the no start if you turn the starter over it will for a...
- Mon Nov 08, 2010 10:08 am
- Forum: Dodge Cars
- Topic: 2000 Dodge Intrepid - 3.2L Hard Start
- Replies: 13
- Views: 8121
Re: 2000 Dodge Intrepid - 3.2L Hard Start
THANKS FOR THE HELP. WE ARE GOING TO TRY ANOTHER PUMP
- Mon Nov 08, 2010 9:47 am
- Forum: Dodge Cars
- Topic: 2000 Dodge Intrepid - 3.2L Hard Start
- Replies: 13
- Views: 8121
Re: 2000 Dodge Intrepid - 3.2L Hard Start
REGULATOR IS ON TOP OF THE FUEL PUMP MODULE. BEEN OUR EXPERIENCE THAT A BAD REGULATOR WOULD CAUSE PRESSURE TO BE TOO HIGH.
- Mon Nov 08, 2010 9:20 am
- Forum: Dodge Cars
- Topic: 2000 Dodge Intrepid - 3.2L Hard Start
- Replies: 13
- Views: 8121
Re: 2000 Dodge Intrepid - 3.2L Hard Start
PRESSURE DOES STAY AT 25PSI FOR AT LEAST 10 MINS. ONCE IT STARTS IT RUNS FINE UNTIL YOU CUT THE ENGINE OFF AND LEAVE IT AND THEN RESTART LATER.