So here is the update, yes we scoped and the code sets so fast was hard to get a good signal, we actually put a custom tune into it and blocked out those codes and vehicle runs great, waveform looks good. Ordered a reman pcm, installed and not p2306 i believe it was for cylinder 1, got another pcm i...

Yes all OEM parts, does not matter if it is switched to another cylinder. We think we have a bad driver in the pcm.

So I will see if we get any chimes on this one. I have a 20120 Dodge journey, 3D4PG5FV1AT257329 with 55,000 miles. The cust brought us the vehicle had codes P0206, P0205, P0204, P0201, P0660 after she manually washed it, ran rough, towed it here, runs good, cleared codes test drive and no issues. Sh...

Thank you

2T3A1RFV6RW428026 does not decode and no manual option for a rav. running 8.5.3.1226

590 this used to work, without a vehicle in it, and now does again, so they did have some sort of glitch. It does now work I can leave the vehicle field completely blank, and just type in a part number and it will now transfer again.

He verified while he was here, it is on Oreilly first call side, hope to have fixed within a week. Thank you

No it used to work, it does from other look stores, auto value etc. Just not first call. The manager was here he thinks since it works from other vendors it must be on their end

I have done multiple different seal numbers, exhaust gasket numbers, flange numbers. 31886, 31388, it is because I do not have a vehicle in the parameters, because it is a trailer. It works if I have a vehicle in the system for it. We do alot of trailers, walk in exhaust so we dont have a vehicle lo...

Yes by part number.

Is there a reason why if we have a customer with a trailer in vehicle so there is no look up, we go to first call, get the seals we need, go to transfer we get an error that says no internet connection, or internal server failure? Or it says an error detected from the catalog. An error occured while...

So this is just for inventory, and not to scan a vehicle in?

Yes other will see it here. Is there a special program needed to run it with Manager, like Bolt on?

Yes I already had labor class taxable there. Thanks again for the help!

I was thinking if it was checked it should apply, thats the way it reads since the heading at the top says labor is taxable

Well I believe that worked, I thought that box would have had to be checked to have the tax applied. Hmm seems to work now thanks!!!!

That is what I have

Unchecked, checked all stays the same, even have the account class set to labor taxable, still no avail. I am guessing there is not a fix to this problem. We cant be the only ones who have to put tax on some labor items.

Yes that is all clicked, and still does not apply tax to labor when put in repair order