Search found 59 matches

by asample
Thu Feb 04, 2016 10:07 am
Forum: Ford Cars
Topic: Old Dog New Tricks
Replies: 5
Views: 3680

Re: Old Dog New Tricks

Another way, which we use, is to tap into engine vacuum and just let it run occasionally turning the steering wheel. Have been doing this for a lot of years. \ One time a friend of mine bought a 1958 T-Bird from a car lot that I was very familiar with and the ps pump was noisy. The dealer agreed to ...
by asample
Fri Oct 17, 2014 1:55 pm
Forum: Ford Trucks
Topic: Ford 5.4L Spark Plug Removal Time
Replies: 26
Views: 14486

Re: Ford 5.4L Spark Plug Removal Time

Had a customer with F150 5.4L. A relative did him a favor and change spark plugs. Broke 3 and in process of "repairing" it got debris in engine and scored cylinder walls. We installed reman engine. Normally we don't have a real issue if careful. Have repaired several that blew the plugs out of the h...
by asample
Tue Apr 22, 2014 4:32 am
Forum: Database + Settings
Topic: Cap On Shop Supplies?
Replies: 9
Views: 3831

Re: Cap On Shop Supplies?

I agree with Steve. This charge can be omitted or modified to fit the circumstances. They are there automatically but are not chiseled instone.
by asample
Mon Apr 21, 2014 10:46 am
Forum: Database + Settings
Topic: Cap On Shop Supplies?
Replies: 9
Views: 3831

Re: Cap On Shop Supplies?

SETUP > SHOP/HAZMAT TAB > Set MIN/MAX AMOUNTS
by asample
Wed Nov 27, 2013 5:49 am
Forum: Parts + Ordering
Topic: TIP: Stay Under List Price?
Replies: 4
Views: 2056

Re: Stay Under List Price?

I agree with Ric. Published list or retail price is an arbitray figure. Even if your customer calls the dealer for pricing on a part you used and it is lower than what you charged, ask them to call the service department and ask them what they charge for that part. It probably will be even higher th...
by asample
Thu Sep 12, 2013 1:17 pm
Forum: Ford Trucks
Topic: 1977 Ford E350 - 5.8L Timing Set
Replies: 9
Views: 4820

Re: 1977 Ford E350 - 5.8L Timing Set

I have an old Motorcraft tune-up guide. There were a couple of different 5.8L engines. Cleveland and modified are basically the same. The Windsor engine is the only one listed for this application ( with 2V carb ). 8 degres BTDC with vacuum line plugged ( I would remove and plug both. One is advance...
by asample
Mon May 20, 2013 11:50 am
Forum: Polls
Topic: POLL: ProDemand
Replies: 8
Views: 7253

Re: POLL: ProDemand

ProDemand is much easier to approach with the new VIN decoder. Cut and paste VIN and loads pretty fast. I open the program when I open in the AM and leave it open all day. One click takes you there then paste in VIN. Still, it navigates differently and will take some getting used to. Have been using...
by asample
Sat Jan 19, 2013 1:19 pm
Forum: MEMBER REPAIR TIPS
Topic: Reman or Getting Rebuilt?
Replies: 11
Views: 5978

Re: Reman or Getting Rebuilt?

My NAPA store stands behind me very well . The major issue I have found even with new parts is that there is absolutely no pride in workmanship anymore. Just put in your time and collect a pay check.
by asample
Sat Jan 19, 2013 11:08 am
Forum: MEMBER REPAIR TIPS
Topic: Reman or Getting Rebuilt?
Replies: 11
Views: 5978

Re: Reman or Getting Rebuilt?

I am a NAPA AutoCare shop. All rotating electrical carries a limited life time warranty, to the original purchaser for that venicle. If there is an issue within 6 months and we do the second repair they cover the labor at 75% of my flat rate. If more than 25 miles from my shop that labor warranty go...
by asample
Tue Dec 18, 2012 1:55 pm
Forum: Reports + Printing
Topic: Fleet Vehicle Reporting
Replies: 7
Views: 3450

Re: Fleet Vehicle Reporting

How about go to history screen on any vehicle and click on print at bottom of screen. This I think will give you all of the info you are looking for. I have my print options set to "print to screen" so you can review it before priniting it out.
by asample
Thu Sep 13, 2012 2:13 pm
Forum: Dodge Trucks / Jeep
Topic: 2003 Jeep Liberty - 3.7L Hole in Head
Replies: 18
Views: 12370

Re: 2003 Jeep Liberty - 3.7L Hole in Head

I get all of my reman heads from Clearwater Cylinder Heads in Clearwater, Florida. Had excellent luck with them. Takes about 3-5 days depending where you are. They charge shipping one way and supply call tag for core return. Less money than any I can get locally. 5100 ULMERTON RD SUITE 2 Clearwater,...
by asample
Thu Jul 26, 2012 3:58 pm
Forum: Dodge Trucks / Jeep
Topic: 1999 Dodge Dakota - 3.9L Timing Chain
Replies: 8
Views: 3933

Re: 1999 Dodge Dakota - 3.9L Timing Chain

I use Clearwater Cylinder Heads in Clearwater, Florida. Good price, 3-5 day deliver and good quality.
(800)572-1963
by asample
Tue Jul 24, 2012 6:36 am
Forum: GM Trucks
Topic: GMC Savannah Bus - A/C - FIXED
Replies: 9
Views: 3232

Re: GMC Savannah Bus - A/C - FIXED

Glad I'm not the only one that has been stymied by this situation. Just wish it hadn't taken me so long to find the solution. When the first two compressors could not be coericed to produce suction and vacuum on the bench it just seemed logical to suspect the compressors. Lessons like this are learn...
by asample
Mon Jul 23, 2012 12:55 pm
Forum: GM Trucks
Topic: GMC Savannah Bus - A/C - FIXED
Replies: 9
Views: 3232

GMC Savannah Bus - A/C - FIXED

Sorry I have not posted this earlier. Wanted to make sure that it stayed fixed and I have not spent much time in the office since my last post with being out of town to help my sister celebrate her 50th wedding anniversery, then took an Alaska cruise. The day we got back our daughter, son-in-law and...
by asample
Sun Jul 22, 2012 2:56 pm
Forum: GM Trucks
Topic: GMC Savanna G3500 Bus - A/C Issues
Replies: 6
Views: 2828

Re: GMC Savanna G3500 Bus - A/C Issues == FIXED

Sorry I have not posted this earlier. Wanted to make sure that it stayed fixed and I have not spent much time in the office since my last post with being out of town to help my sister celebrate her 50th wedding anniversery, then took an Alaska cruise. The day we got back our daughter, son-in-law and...
by asample
Tue Jun 19, 2012 4:57 pm
Forum: Dodge Trucks / Jeep
Topic: 2004 Grand Cherokee Ltd - A/C Shuts Off
Replies: 14
Views: 6628

Re: 2004 Grand Cherokee Ltd - A/C Shuts Off

My interpretation of what has been said so far leads me to the blower motor or motor controls. When the air quits flowing can the fan still be heard or does it go silent??
by asample
Tue Jun 19, 2012 4:54 pm
Forum: GM Trucks
Topic: GMC Savanna G3500 Bus - A/C Issues
Replies: 6
Views: 2828

Re: GMC Savanna G3500 Bus - A/C Issues

I considered the possibility of an internal hose issue but this being barrier hose and being able to blow through it in both directions kinda discounted that theory. Did not completely pur it out of mind but just can't see it happening like it could on the old rubber hose. Don't give up on me. Still...
by asample
Mon Jun 18, 2012 10:29 am
Forum: GM Trucks
Topic: GMC Savanna G3500 Bus - A/C Issues
Replies: 6
Views: 2828

GMC Savanna G3500 Bus - A/C Issues

This is a G3500 cab and chassis that is a 16 passenger bus. Has factory ac in the dash and an added Carrier inside roof mount auxiliary unit in the back. Powered condenser under the side of the bus. Front condenser has been bypassed. Came to us with a hot electrical odor. AC clutch was burned up. Wh...
by asample
Sat Jun 16, 2012 3:30 am
Forum: GM Trucks
Topic: 2008 GMC Acadia - Steering Questions
Replies: 2
Views: 1590

Re: 2008 GMC Acadia - Steering Questions

Thanx Steve. I will check out that tsb when I get back to the shop.
by asample
Fri Jun 15, 2012 12:38 pm
Forum: GM Trucks
Topic: 2008 GMC Acadia - Steering Questions
Replies: 2
Views: 1590

2008 GMC Acadia - Steering Questions

Looking for some insight and possible same experience. 2008 GMC Acadia Steering assist will almost go away about 1/2 turn from steering stop either direction. Can forcibly steer through it. Steers fine straight or slight turn. Fluid is full and clean. First attempt to duplicate issue only occurred a...

Go to advanced search