Our shop has a 2003 Excursion (1fmsu43p3eb56232 6.0L) with crank sensor and cam sensor codes set when cranking engine; will start on occaision.
Not a diesel shop, customer has had it to ford dealers not able to find anything. We installed new Cam sensor, drove away, month later comeback with same issue. Called a ford tech for a little help if they have seen repeated problems with this and answer was no.
He did advise cam & crank codes could set and these may have nothing to do with the problem.
2003 Ford Excursion - 6.0L Crank/Cam Codes Fixed wire harnes
2003 Ford Excursion - 6.0L Crank/Cam Codes Fixed wire harnes
Last edited by LLOYDS on Mon Mar 15, 2010 10:52 am, edited 1 time in total.
MIKE
- wbuxton
- 1000 Club: Interstellar
- Posts: 1293
- Joined: Fri Jan 05, 2007 8:08 am
- Location: 30 miles west of Fort Worth
- Contact:
Re: 2003 Ford Excursion - 6.0L Crank/Cam Codes
Prior to your year model Ford had a shim to go behind the cam sensor due to close tolerance. Are there any witness marks on the old sensor?
Uncle PETA said I could come back.
William
Weatherford, TX
817-599-7680
866-744-3887
http://www.phoenixtrans.com
William
Weatherford, TX
817-599-7680
866-744-3887
http://www.phoenixtrans.com
- steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: 2003 Ford Excursion - 6.0L Crank/Cam Codes
i have a ford truck on the lot with a similar issue. ford claims it needs a crank shaft. they claim there is an issue with the toner ring that the crank sensor reads.
never argue with a fool, they'll drag you down to their level and beat you with experience
-
- 100 Club: Active Contributor
- Posts: 154
- Joined: Wed Jul 20, 2005 2:08 am
- Location: Fort Lauderdale
Re: 2003 Ford Excursion - 6.0L Crank/Cam Codes
Please check thrust bearing end gap on boyth those engines as we have had to replace bearings a few times!
We have also replace multiple crank sensors on this model. We always replace in pairs cam and crank!.
We have also replace multiple crank sensors on this model. We always replace in pairs cam and crank!.
If they don't know how can they fix it!
Re: 2003 Ford Excursion - 6.0L Crank/Cam Codes
can not see any rub marks on old sensor or new won
will have to check the tolerances on trust bearing play
will have to check the tolerances on trust bearing play
MIKE