Updating All Our PCs to New Hardware

Manager SE specific technical issues
Post Reply
User avatar
David Talbert
Member
Posts: 2
Joined: Mon Sep 19, 2022 7:39 am

Updating All Our PCs to New Hardware

Post by David Talbert »

As the subject states, We are upgrading all our PC's to new hardware. The New Host PC however is on Windows 11 and the secondary seats (3 total) all have windows 10. Before I get started are there any known issues I should be aware off. Basically i dont want to get started and run into a compatability issue with windows 11 and windows 10
User avatar
Silky7
System Guru / Moderator
System Guru / Moderator
Posts: 1035
Joined: Mon Dec 31, 2007 10:07 am

Re: Updating All Our PCs to New Hardware

Post by Silky7 »

Hi David,

Our support has seen periodic issues in networking between Windows 10 and 11 (beyond our scope of support), but the shop management application is supported on either operating system. Anecdotally speaking, we have a lot of customers who have done this same type of upgrade without hiccup.

Hope it goes smoothly for you!
M1 Product Manager
User avatar
David Talbert
Member
Posts: 2
Joined: Mon Sep 19, 2022 7:39 am

Re: Updating All Our PCs to New Hardware

Post by David Talbert »

I appreciate the response. I guess im going to FAFO. I'll start with the secondary seats first before I try to swap over the host computer.
User avatar
Bill Coniam
25 Club: Starting Contributor
Posts: 30
Joined: Tue Feb 09, 2016 7:40 am

Re: Updating All Our PCs to New Hardware

Post by Bill Coniam »

Probably a free upgrade to 11 on the other workstations
Back in the saddle again
Post Reply

Return to “Technical Issues”