SE Estimate Printing No Header?
- cardoc
- 50 Club: Regular Contributor
- Posts: 51
- Joined: Fri Nov 18, 2005 8:12 am
- Location: Jefferson City, Mo. 65109
- Contact:
SE Estimate Printing No Header?
Well I cant remember if the estimates every printed with the shop name on it since we went to version 6. I know version 5 did. So am I missing a check somewhere?? Seams on the estimates are printing without the shop name. All else seams fine. Have tried all the estimate print selections and none are putting the shop name at the top. Alan
Quality is not expensive, It is Priceless!
ASE L1 Master Certified Automotive Technician,
Service Advisor, & AMI Graduate
ASA Member
ASE L1 Master Certified Automotive Technician,
Service Advisor, & AMI Graduate
ASA Member
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5967
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Estimate Printing
Alan. What estimate template are you using? Have you tried a different one to see if it's just that template?
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
- cardoc
- 50 Club: Regular Contributor
- Posts: 51
- Joined: Fri Nov 18, 2005 8:12 am
- Location: Jefferson City, Mo. 65109
- Contact:
Re: Estimate Printing
Yes tried all the estimate templets without hours.
Quality is not expensive, It is Priceless!
ASE L1 Master Certified Automotive Technician,
Service Advisor, & AMI Graduate
ASA Member
ASE L1 Master Certified Automotive Technician,
Service Advisor, & AMI Graduate
ASA Member
- timbre4
- System Guru / Moderator
- Posts: 4457
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: Estimate Printing
Go to Configurations, Setup Reports/Printers and confirm Estimate print settings. Specifically look at the Include Header Information box to confirm it is checked. If that box is unchecked, the shop information is not printed (or displayed in print preview).
This would be turned off for Invoices (to support space for SE shop logo graphic) but not likely for Estimates.
This would be turned off for Invoices (to support space for SE shop logo graphic) but not likely for Estimates.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- timjlive
- 200 Club: Major Contributor
- Posts: 217
- Joined: Mon Oct 29, 2007 9:13 am
- Location: Sheboygan Falls, WI
- Contact:
Re: Estimate Printing
Make sure the check box for Include Header Information is checked.
- Attachments
-
- Fallsheader.png (172.81 KiB) Viewed 2649 times
Tim L.
Falls Uptown Motors
920-467-2311
Falls Uptown Motors
920-467-2311