AutoValue - Myplace4parts link

Parts, catalogs, purchase orders, inventory
Locked
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

AutoValue - Myplace4parts link

Post by rhillig »

I replaced my computer - which just runs Mitchell as a workstation. I was able to get everything loaded & working - but the AutoValue/Myplace4parts link.
I'm trying to decide if it's a Mitchell side problem or stupid user (me) problem.
I installed the catalog & it appears to have pulled the username/password over from the main system.
But when I click the AutoValue icon on the bottom of a repair order I get a pop up that says Invalid seller id.
Screenshot 2020-11-23 172521.png
Screenshot 2020-11-23 172521.png (4.98 KiB) Viewed 3902 times
A year from now you will wish you had started TODAY ~ Karen Lamb
User avatar
Rich
4K Ultra Amazing Contributor
4K Ultra Amazing Contributor
Posts: 4041
Joined: Tue Sep 06, 2005 10:16 am
Location: Somewhere in Michigan
Contact:

Re: AutoValue - Myplace4parts link

Post by Rich »

Not sure this link will help you or not, it is what I had to use when we upgraded our system. You may have already done this.

https://myplaceforparts.com/web/autowar ... egrations1
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

Re: AutoValue - Myplace4parts link

Post by rhillig »

Rich wrote:
Tue Nov 24, 2020 5:08 am
Not sure this link will help you or not, it is what I had to use when we upgraded our system. You may have already done this.

https://myplaceforparts.com/web/autowar ... egrations1
I did do that, but something must not be connecting right, because it comes up with the incorrect seller id. If I look at the vendor link - it shows the same information as the host computer :( :roll:
A year from now you will wish you had started TODAY ~ Karen Lamb
User avatar
Rich
4K Ultra Amazing Contributor
4K Ultra Amazing Contributor
Posts: 4041
Joined: Tue Sep 06, 2005 10:16 am
Location: Somewhere in Michigan
Contact:

Re: AutoValue - Myplace4parts link

Post by Rich »

May be best to email or call, this is all I see for set up help. When I did it I had the local salesman helping me.
Attachments
Screenshot 2020-11-24 094907.jpg
Screenshot 2020-11-24 094907.jpg (14.91 KiB) Viewed 3881 times
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

Re: AutoValue - Myplace4parts link

Post by rhillig »

Rich wrote:
Tue Nov 24, 2020 6:50 am
May be best to email or call, this is all I see for set up help. When I did it I had the local salesman helping me.
Thank you - for some reason I did not see that!
I will see what they have to say.

He's out of the office this week. So we will see what next week brings ;)
A year from now you will wish you had started TODAY ~ Karen Lamb
User avatar
Rich
4K Ultra Amazing Contributor
4K Ultra Amazing Contributor
Posts: 4041
Joined: Tue Sep 06, 2005 10:16 am
Location: Somewhere in Michigan
Contact:

Re: AutoValue - Myplace4parts link

Post by Rich »

Here is a typical answer I would expect from an IT guy........

Did you restart the system? :lol:
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

Re: AutoValue - Myplace4parts link

Post by rhillig »

They did get back to me, somehow our system was working with the wrong credentials. Now that I have the correct username & password everything works as it should!
A year from now you will wish you had started TODAY ~ Karen Lamb
Locked

Return to “Parts + Ordering”