2002 Kia Optima 2.4L ENG - Torque Spec Correction

Questions and comments about using ProDemand or ShopKeyPro information modules
Post Reply
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

2002 Kia Optima 2.4L ENG - Torque Spec Correction

Post by rhillig »

Hello,

We found an error today. On the 2002 Kia Optima 2.4 engine torque spec for installing a cylinder head (without replacing head bolts) they list step 1 as tighten to 2Nm (20kg.m, 0.14lb ft) The decimal is in the wrong place - should be 14lb ft.
A year from now you will wish you had started TODAY ~ Karen Lamb
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4457
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction

Post by timbre4 »

Thanks for letting us know. Did you by chance enter it in FEEDBACK? If so, they already have this in editorial.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
rhillig
500 Club: Champion Contributor
500 Club: Champion Contributor
Posts: 599
Joined: Sat May 14, 2005 11:20 am
Location: Long Prairie, MN
Contact:

Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction

Post by rhillig »

I did not enter it in feedback, I will look for that next time we see a problem.

Thanks
A year from now you will wish you had started TODAY ~ Karen Lamb
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4457
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: 2002 Kia Optima 2.4L ENG - Torque Spec Correction

Post by timbre4 »

Thanks, I forwarded this one to editorial.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Post Reply

Return to “Using ProDemand”