Database corrections?

Questions and comments about using ProDemand or ShopKeyPro information modules
Post Reply
MarionB2BAuto
100 Club: Active Contributor
100 Club: Active Contributor
Posts: 102
Joined: Thu Dec 22, 2011 1:29 pm
Location: Marion, Alabama
Contact:

Database corrections?

Post by MarionB2BAuto »

I am not sure where to put this, so I figured I would post here. Where do we go, or post, if we find an error in the database information for a vehicle? Specifics are that in the "repair" section for a 1st generation (1996 to 2004) Toyota Tacoma with automatic transmission, the database says that the proper refill for the automatic transmission is between 1.7 and 2.5 US Quarts, depending on application. This information is incorrect. Every Toyota in this year range that I have services has required 4 US quarts to get it full. I have tried to locate the information, but have come up short, where Toyota listed that their database was incorrect years ago.
8 Years USMC as M-60 tank Tech, M-1 Abrams tank Tech, Hull and Turret certified
20 Years with General Motors
15 years With GM as an ASEP Technician Trainer/Mentor
20 Years ASE Master recertified Technician
L1 Recertified
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4460
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Database corrections?

Post by timbre4 »

Since this is about repair information I moved it to that section. Under Repair topics there is a product support link to use. I copied it below:

http://www.buymitchell1.com/form/productsupport.htm
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Post Reply

Return to “Using ProDemand”