Pinpad with NFC and Signature

Discussion area for integrated credit card processing
Post Reply
User avatar
Cory
100 Club: Active Contributor
100 Club: Active Contributor
Posts: 157
Joined: Mon May 01, 2006 8:01 pm
Location: Fremont, Nebraska
Contact:

Pinpad with NFC and Signature

Post by Cory »

I know X-Charge is working to implement the NFC Capabilities into their system. Is there a time frame when this will be available? Also, is there a way to put a signature pad at the front counter for transactions and work approval, such as the ISC250?
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

From product management:

"We will have new hardware in early August in preparation for the October release of new EMV technology. The customer will have the choice of several different models of hardware, the nicer models include both NFC and a signature pad."
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
KSTAUTOMOTIVE
25 Club: Starting Contributor
Posts: 36
Joined: Sun Dec 26, 2010 7:36 pm
Location: 14104 N. 88TH AVE PEORIA , AZ 85381

Re: Pinpad with NFC and Signature

Post by KSTAUTOMOTIVE »

I updated to windows 10 and lost PINPAD for xcharge. Called tech line. They said I needed a new cable. I ordered one online, hope to get Friday and see if gets working again. :roll:
Kevin Thompson

KST AUTOMOTIVE
&
MOBIL 1 LUBE EXPRESS

FULL SERVICE REPAIR FACILITY
ASE MASTER CERTIFIED 20+ YEARS

623-764-6418

KST AUTOMOTIVE

KSTAUTOMOTIVE@GMAIL.COM
User avatar
Cory
100 Club: Active Contributor
100 Club: Active Contributor
Posts: 157
Joined: Mon May 01, 2006 8:01 pm
Location: Fremont, Nebraska
Contact:

Re: Pinpad with NFC and Signature

Post by Cory »

Will the signature pad work with Mitchell, such as transferring their signature to the invoice?
User avatar
Rich
4K Ultra Amazing Contributor
4K Ultra Amazing Contributor
Posts: 4041
Joined: Tue Sep 06, 2005 10:16 am
Location: Somewhere in Michigan
Contact:

Re: Pinpad with NFC and Signature

Post by Rich »

Going to EMV by October 1 is not a law. Don't forget that, your not forced to buy under pressure. Your CC provider may charge more rates, and you may be held responsible for fraud.

http://www.creditcards.com/credit-card- ... s-1264.php

http://www.paymentsleader.com/will-reta ... -oct-2015/

If any one want more details I can get them. I have a connection with a CC encryption programmer.
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Gerald Martin
50 Club: Regular Contributor
50 Club: Regular Contributor
Posts: 95
Joined: Wed Oct 22, 2008 8:56 am

Re: Pinpad with NFC and Signature

Post by Gerald Martin »

I know it's still early August for product management...

Any updates on this from X-Charge and Mitchell?

Gerald
scarruther1
50 Club: Regular Contributor
50 Club: Regular Contributor
Posts: 54
Joined: Thu Apr 15, 2010 7:42 am

New CC Hardware

Post by scarruther1 »

Do we need to buy new hardware from XCharge for EMV? When will this be available?
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

From Product Mgmt.:

"Yes it ranges from $249-$699 depending on functions and features or $16 rental plans. It's currently available. 888-412-8816"
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

From Product Mgmt.:

"No Signature Capture yet; development story is being written and we should have it by end of 2016."

EDIT: 2015 typo corrected to 2016.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
Cory
100 Club: Active Contributor
100 Club: Active Contributor
Posts: 157
Joined: Mon May 01, 2006 8:01 pm
Location: Fremont, Nebraska
Contact:

Re: Pinpad with NFC and Signature

Post by Cory »

timbre4 wrote:From Product Mgmt.:

"No Signature Capture yet; development story is being written and we should have it by end of 2015."
I noticed there has been some updates to the electronic payment processing within Mitchell. I assume that the signature capture is working now?
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

Cory wrote:
timbre4 wrote:From Product Mgmt.:

"No Signature Capture yet; development story is being written and we should have it by end of 2015."
I noticed there has been some updates to the electronic payment processing within Mitchell. I assume that the signature capture is working now?
My apologies; I was just informed that '2015' was a typographical error on my part and that it should have read '2016'. I will amend that posting right now. The certification to process EMV has been completed and I was told to expect an update soon on the balance of the project.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
scarruther1
50 Club: Regular Contributor
50 Club: Regular Contributor
Posts: 54
Joined: Thu Apr 15, 2010 7:42 am

Re: Pinpad with NFC and Signature

Post by scarruther1 »

I have the new hardware Ingenico ISC250 tough in hand, but am reluctant to install. If you have installed yours, how is it going?

How do you print a receipt a CC receipt, or is it captured when they sign the terminal?

Thanks
Mikes Tire And Auto
Member
Posts: 1
Joined: Thu Jun 09, 2016 11:10 am

Re: Pinpad with NFC and Signature

Post by Mikes Tire And Auto »

Is Mitchell able to print the customer signature from X-charge on invoice? If not when will that be available?
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

Mikes Tire And Auto wrote:Is Mitchell able to print the customer signature from X-charge on invoice? If not when will that be available?
Welcome to the forum and thanks for posting.

We do not have this capability at present; however I'm pleased to report that a development project is underway now that will incorporate this functionality. Timeframe: by September 2016
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Kingdom
Member
Posts: 5
Joined: Fri Sep 30, 2016 3:49 am

Re: Pinpad with NFC and Signature

Post by Kingdom »

Did Mitchell get the signature capture feature going yet? This would be very helpful for us at my facility.
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
Posts: 4456
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: Pinpad with NFC and Signature

Post by timbre4 »

I just asked for an update from product management, here's what I was told:

At the AAPEX 2016 trade show, we'll be introducing an additional credit card processing option for Manager SE called '1st Mile' from Merchant Partners. (more details soon)

1st Mile will launch with the signature capture feature; X-Charge is still slated to get this but we just don't have it firmed up at this moment.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Post Reply

Return to “Credit Card Processing”