2004 Ford Ranger - 4.0L TC Tensioner Time?
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
2004 Ford Ranger - 4.0L TC Tensioner Time?
How long does it take to replace the right timing chain tensioner on a 04 Ranger with a 4.0L SOHC? My Mitchell1 is not saying. This is the one at the rear of the right cylinder head.
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5968
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: 04 Ranger Timing Chain Tensioner
My source says .5 .
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: 04 Ranger Timing Chain Tensioner
Thanks for checking, men. I appreciate the feedback. My estimator is giving the time for a 2.3L 4 cylinder but not for the 4.0L SOHC engine.
Thanks again.
Thanks again.
- brianp87
- 3K Time Lord Contributor
- Posts: 3133
- Joined: Tue Oct 10, 2006 6:11 am
- Location: Arizona
- Contact:
Re: 04 Ranger Timing Chain Tensioner
It does say that if chain needs to be doen engien comes out I think ive done these that way before been to long to remember tho
- timbre4
- System Guru / Moderator
- Posts: 4467
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: 04 Ranger Timing Chain Tensioner
I'm forwarding this to the product support dept within editorial for correction.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: 04 Ranger Timing Chain Tensioner
Yea yer right. If the timing chain has an issue then the engine has to come out. But in this case, i got a tensioner that is leaking past the seal and was wondering what the time is on it since this job is done under warranty for another company. Hopefully the chain will not jump when I remove the tensioner.brianp87 wrote:It does say that if chain needs to be doen engien comes out I think ive done these that way before been to long to remember tho
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: 04 Ranger Timing Chain Tensioner
Thanks Tim. Mitchell1 is not perfect but it is tooting good.timbre4 wrote:I'm forwarding this to the product support dept within editorial for correction.