Vehicle Selection When Creating Appointment

Discussions of SE Scheduler/ Appointment Editor
Locked
nhsc
25 Club: Starting Contributor
Posts: 35
Joined: Tue Mar 04, 2008 10:54 am
Location: N. HAMPTON NH

Vehicle Selection When Creating Appointment

Post by nhsc »

Snap of Vehicle List when Scheduling..PNG
Snap of Vehicle List when Scheduling..PNG (14.15 KiB) Viewed 2156 times
Please see above. Very often when creating an appointment, the vehicle selection screen will open and the first to columns (plate and state) will be over-sized and the remaining columns are squished closed so that you can't see year or make. Why?
JAY PHILLIPS
User avatar
Silky7
System Guru / Moderator
System Guru / Moderator
Posts: 1035
Joined: Mon Dec 31, 2007 10:07 am

Re: Vehicle Selection When Creating Appointment

Post by Silky7 »

Jay,

Please see the bottom part of this post. http://www.managerforum.net/viewtopic.php?f=233&t=12237
M1 Product Manager
nhsc
25 Club: Starting Contributor
Posts: 35
Joined: Tue Mar 04, 2008 10:54 am
Location: N. HAMPTON NH

Re: Vehicle Selection When Creating Appointment

Post by nhsc »

I am set up as a user and yes the view will be fine after I change it, but it seems like after a restart, it goes back to the way I showed before.

User.PNG
User.PNG (17.29 KiB) Viewed 2151 times
JAY PHILLIPS
User avatar
Silky7
System Guru / Moderator
System Guru / Moderator
Posts: 1035
Joined: Mon Dec 31, 2007 10:07 am

Re: Vehicle Selection When Creating Appointment

Post by Silky7 »

Close all the stations first, to make sure the user profile is only open on one computer. Setup the screen the way you want under that user, then close it on the host as well. Afterwards you should be set on all stations using that profile.
M1 Product Manager
Locked

Return to “Scheduler”