POLL: Watched our Training Videos?
- timbre4
- System Guru / Moderator
- Posts: 4460
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
POLL: Watched our Training Videos?
For planning purposes, I'd like to know how many users have taken advantage of the 86 training videos that are included on the shop management installation CD. There is an option to install them as part of the demo or live version install, however they can be added later at anytime.
When installed, they're available from the Training Videos link on the top menu of the shop mgmt software. When clicked, a master How Do I? list appears and users may select whatever concept they wish to learn more about. Average running time is two minutes or less.
TIP: With F1 Help, there may be an option to watch a related video. When you see a camera icon, there is a training video available.
Please vote according to the way you've used them at your shop; also post any comments you may have regarding these brief tutorials.
When installed, they're available from the Training Videos link on the top menu of the shop mgmt software. When clicked, a master How Do I? list appears and users may select whatever concept they wish to learn more about. Average running time is two minutes or less.
TIP: With F1 Help, there may be an option to watch a related video. When you see a camera icon, there is a training video available.
Please vote according to the way you've used them at your shop; also post any comments you may have regarding these brief tutorials.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
- 1500 Club Master Plus Contributor
- Posts: 1705
- Joined: Thu Mar 01, 2007 12:19 pm
Re: Watched our Training Videos?
Used them extensivley on first set up. Stii use them when I have a brain fade
Jeff Fitzgerald - retired
Treasure Coast of Florida
"there will be enough time to sleep when we're dead"
Treasure Coast of Florida
"there will be enough time to sleep when we're dead"
- John C.
- 500 Club: Champion Contributor
- Posts: 693
- Joined: Sat Jan 12, 2008 6:24 am
- Location: Massatwoschits
- Contact:
Re: Watched our Training Videos?
I haven't watched any in quite some time, but they were extremely helpful in the beginning, and even after we'd been using it a while, I watch some from time to time and learn something new.
John C.
- timbre4
- System Guru / Moderator
- Posts: 4460
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: POLL: Watched our Training Videos?
This Poll is still open, let's see some more votes!
Even if you've never posted, you may vote in the Polls.
Even if you've never posted, you may vote in the Polls.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- gatorgirl
- 500 Club: Champion Contributor
- Posts: 517
- Joined: Wed May 07, 2008 9:18 am
- Location: Lake Charles, LA
- Contact:
Re: POLL: Watched our Training Videos?
I haven't watched them all like I probably need to, but I do quite often search the forum & Quick Answers for any questions I have.
Angie LaPrime AKA Gatorgirl
Valuable Indispensable Dedicated Employee
http://www.myspace.com/gatorgirl013
http://www.facebook.com (search Angie Richard LaPrime)
WATCH FOR MOTORCYCLES!!
Valuable Indispensable Dedicated Employee
http://www.myspace.com/gatorgirl013
http://www.facebook.com (search Angie Richard LaPrime)
WATCH FOR MOTORCYCLES!!
Re: POLL: Watched our Training Videos?
This is a hard one to answer. Back when I beta'd SeriesII I know I installed them for testing purposes and I remember looking at them then. But I believe that was back in 1996. Since the switch to Shopkey Management they have not been installed.
Jerry
Jerry
Jerry Kaminski
Cartec Automotive Service
Tulsa Ok
V918-747-1840
Cartec Automotive Service
Tulsa Ok
V918-747-1840
- timbre4
- System Guru / Moderator
- Posts: 4460
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: POLL: Watched our Training Videos?
10-4; just know that there are 86 ShopKey version video files too.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: POLL: Watched our Training Videos?
I just now voted, although I'm not sure if the poll is still open on this one.
I have found many of the training videos very helpful and would encourage more as time goes on.
Again, Thanks to Mitchell1 for great products. I know I have said this before but I am extremely grateful for the info I get from you men.
I have found many of the training videos very helpful and would encourage more as time goes on.
Again, Thanks to Mitchell1 for great products. I know I have said this before but I am extremely grateful for the info I get from you men.
- timbre4
- System Guru / Moderator
- Posts: 4460
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: POLL: Watched our Training Videos?
Thanks for the encouragement!
By putting all of the Polls in one area, it breathes new life into older ones like this. I'm going to keep them open.
Training Videos and other tools will expand with on-line access, no more disc space issues ahead.
By putting all of the Polls in one area, it breathes new life into older ones like this. I'm going to keep them open.
Training Videos and other tools will expand with on-line access, no more disc space issues ahead.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: POLL: Watched our Training Videos?
Are you insinuating that there is more in the online version than the dvd version that I use?
- timbre4
- System Guru / Moderator
- Posts: 4460
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: POLL: Watched our Training Videos?
Learning Modules (25-30 min segments) today go much much further than the videos provided on installation disc.Tim Martin wrote:Are you insinuating that there is more in the online version than the dvd version that I use?
http://performancecenter.mitchell1.com/ ... videos.asp
Training Videos on disc are in the process of morphing into Quick Videos on the web (ready soon). The set can grow because it will no longer be tied to disc space and production deadlines. Combined with the forum and Quick Answers we'll have more that was ever possible before.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
- 2.5K Uber Ninja Contributor
- Posts: 2642
- Joined: Wed Feb 04, 2009 1:28 pm
- Location: PA
Re: POLL: Watched our Training Videos?
Thanks for the info. I'll be sure to check it out in more detail when I have more time than I have right now.