2002 Subaru WRX - Sub-Frame Labor?

Mark F · Post by **Mark F** » Thu Oct 28, 2010 12:11 pm

Hello,

Would anyone have the labor time to replace sub frame on this fine auto.

Thanks ...Mark

wbuxton · Post by **wbuxton** » Thu Oct 28, 2010 12:53 pm

Transmission R&R is around 4.5 depending on manual or automatic and/or normally aspirated or turbo. So, I would say 2.0 would be more then fair for you.

Mark F · Post by **Mark F** » Thu Oct 28, 2010 1:00 pm

Thanks.That sounds fair.. Mark

liljoe · Post by **liljoe** » Thu Oct 28, 2010 2:24 pm

When I looked in MOD5.com it showed 5.8 for crossmember replacement. Don't know if this is correct or not.

: WRX SUBFRAME LABOR.jpg (140.33 KiB) Viewed 2920 times

steven kiser · Post by **steven kiser** » Fri Oct 29, 2010 1:45 am

sub frame = crossmember, correct? i looked under suspension and saw cross member as 5.8 without alignment. the year of the car is border line where i raise my labor rate depending on rust, wear and tear.

Mark F · Post by **Mark F** » Fri Oct 29, 2010 7:11 am

Sub frame not connected to cross member. Looks straight forward. The only thing connected to sub frame is radiator mounts. Will account time for rust on labor time. Thanks for the help...Mark

2002 Subaru WRX - Sub-Frame Labor?

2002 Subaru WRX - Sub-Frame Labor?

Re: 2002 Subaru WRX - Sub-Frame Labor?

Re: 2002 Subaru WRX - Sub-Frame Labor?

Re: 2002 Subaru WRX - Sub-Frame Labor?

Re: 2002 Subaru WRX - Sub-Frame Labor?

Re: 2002 Subaru WRX - Sub-Frame Labor?