Error trying to order parts on 7.3.7
-
- 750 Club: World Class Contributor
- Posts: 752
- Joined: Tue Dec 12, 2006 10:24 am
- Location: Iowa
Error trying to order parts on 7.3.7
I'm on 7.3.7. When trying to order parts in a sub estimate I get this error. Then the program stops working for awhile then the order screen will appear.
- Attachments
-
- 1.jpg (219.57 KiB) Viewed 5066 times
-
- 25 Club: Starting Contributor
- Posts: 32
- Joined: Wed Dec 02, 2015 9:31 am
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5970
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Error trying to order parts on 7.3.7
This will likely need assistance from support, but what vendor/protocol are you using when the error occurs?
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
-
- 50 Club: Regular Contributor
- Posts: 95
- Joined: Wed Oct 22, 2008 8:56 am
Re: Error trying to order parts on 7.3.7
Try this: Copy and paste the items to another revision. Restart the program. Try again - see if works.
Gerald
Gerald
- Rich
- 4K Ultra Amazing Contributor
- Posts: 4047
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: Error trying to order parts on 7.3.7
I get something like that at times also, been to busy to figure out what triggers it.
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Re: Error trying to order parts on 7.3.7
Sorry all,
I'm a couple of days behind. You can safely ignore this message and continue working. We are releasing a 7.3.8 patch in the near future to address this, but you will see this in Parts Ordering from Revisions periodically until updated.
I'm a couple of days behind. You can safely ignore this message and continue working. We are releasing a 7.3.8 patch in the near future to address this, but you will see this in Parts Ordering from Revisions periodically until updated.
M1 Product Manager
- Johnny5
- 500 Club: Champion Contributor
- Posts: 654
- Joined: Wed May 26, 2004 2:03 pm
- Location: John Dwulet
Re: Error trying to order parts on 7.3.7
As Dan says, you can ignore the message, it does not harm any data. Click on IGNORE. A fix is being brewed right now.
John Dwulet AKA: Johnny5
Retired - Mitchell1
Retired - Mitchell1
- Rich
- 4K Ultra Amazing Contributor
- Posts: 4047
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: Error trying to order parts on 7.3.7
Did i hear BREW? I could use one!
Thanks for letting us know. Not that i was worried....
Thanks for letting us know. Not that i was worried....
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
- Johnny5
- 500 Club: Champion Contributor
- Posts: 654
- Joined: Wed May 26, 2004 2:03 pm
- Location: John Dwulet
Re: Error trying to order parts on 7.3.7
I have some frosty cold Shiner Bocks in the fridge at home...Rich wrote:Did i hear BREW? I could use one!
Thanks for letting us know. Not that i was worried....
John Dwulet AKA: Johnny5
Retired - Mitchell1
Retired - Mitchell1
- Rich
- 4K Ultra Amazing Contributor
- Posts: 4047
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: Error trying to order parts on 7.3.7
If Cali wasn't so far away...I will be in Tims neck of the woods next weekend.Johnny5 wrote:I have some frosty cold Shiner Bocks in the fridge at home...Rich wrote:Did i hear BREW? I could use one!
Thanks for letting us know. Not that i was worried....
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
- timbre4
- System Guru / Moderator
- Posts: 4470
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: Error trying to order parts on 7.3.7
Hey what's all this now?Rich wrote:Johnny5 wrote:Rich wrote:Did i hear BREW? I could use one!
I will be in Tims neck of the woods next weekend.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
Re: Error trying to order parts on 7.3.7
Another error with the parts system. I notice that every time there is an update - it reverts the Mighty catalog to a previous version. I have to go around and manually re-install the Mighty catalog install on each computer.
A year from now you will wish you had started TODAY ~ Karen Lamb
Re: Error trying to order parts on 7.3.7
Thanks for reporting this. It would certainly appear we're installing an older .dll than what is available. Making a record to get that fixed for our next major version/installer.rhillig wrote:Another error with the parts system. I notice that every time there is an update - it reverts the Mighty catalog to a previous version. I have to go around and manually re-install the Mighty catalog install on each computer.
M1 Product Manager