Greetings!
We are unable to print the days Business Summary and are receiving the message "'To' time must be greater than or equal to the 'From' time".
In the past we have been able to select the "From" date as say, 1/21/20 and the "To" date as 1/21/20 and the report will print for the day.
Is there a configuration setting which is now limiting selecting a single day?
Reports - Business Summary -> 'To' time must be greater than
-
- Member
- Posts: 7
- Joined: Wed Jun 12, 2019 7:23 am
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5970
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Reports - Business Summary -> 'To' time must be greater
I just tested it here using the very days you have as an example and it prints fine. Are you sure the 'to' time isn't set to a different year? I've been called out on that one before.
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
-
- Member
- Posts: 7
- Joined: Wed Jun 12, 2019 7:23 am
Re: Reports - Business Summary -> 'To' time must be greater
I double checked again to make sure. Attached a screenshot...ricmorin wrote:I just tested it here using the very days you have as an example and it prints fine. Are you sure the 'to' time isn't set to a different year? I've been called out on that one before.
- Attachments
-
- Untitled.jpg (97.4 KiB) Viewed 3506 times
- Rich
- 4K Ultra Amazing Contributor
- Posts: 4047
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: Reports - Business Summary -> 'To' time must be greater
I tested mine, one thing I do see different is my date shows 1/21/2020 where yours shows 1/21/20. Mine worked ok.
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
-
- Member
- Posts: 7
- Joined: Wed Jun 12, 2019 7:23 am
Re: Reports - Business Summary -> 'To' time must be greater
I just changed the date format and closed and reopened Shopkey on both the host and workstation with the same result. This is driving me bonkers!Rich wrote:I tested mine, one thing I do see different is my date shows 1/21/2020 where yours shows 1/21/20. Mine worked ok.
- Attachments
-
- Untitled.jpg (59 KiB) Viewed 3501 times
Re: Reports - Business Summary -> 'To' time must be greater
Two things to check:
1. The time and date on the computer. Make sure those as accurate, or correct if needed.
2. You will likely want to go through the tabs (where you fixed the date format) for time, date, numeric values and reset on each.
I am inclined to believe the issue is still relating to one of those formats or values. Of course, if you cannot ultimately find a solution, Tech Support is usually pretty quick to address these.
1. The time and date on the computer. Make sure those as accurate, or correct if needed.
2. You will likely want to go through the tabs (where you fixed the date format) for time, date, numeric values and reset on each.
I am inclined to believe the issue is still relating to one of those formats or values. Of course, if you cannot ultimately find a solution, Tech Support is usually pretty quick to address these.
M1 Product Manager