2002 Jeep Liberty - Misfire FIXED
2002 Jeep Liberty - Misfire FIXED
This one is killing us.
We have have a 02 Jeep liberty 3.7. This was brought to us from a transmision shop that just rebuilt the tranny. The complaint was running rough. We checked spark and fuel, both are there. Found radiator blowed out. Ran compression check. Found no compression on three cylinders. Removed the heads and sent to the machine shop, it had three valve seats melted. Reinstalled heads and started. Vehicle ran rough but ran.
This is were it gets tricky. Now we are showing no injector fire on Three cylinders, the same that had the valves seats melted. We had injector pulse before we started this escapade. Trace it back to the computer. Install a new computer and reflash. Vehicle started and ran rough, not as rough, but rough. Found cranksensor loosing synch. Replaced crank and cam sensor. Vehicle will not start now and is showing a secondary code for a ignition coil.
Anyone have any ideas?
We have have a 02 Jeep liberty 3.7. This was brought to us from a transmision shop that just rebuilt the tranny. The complaint was running rough. We checked spark and fuel, both are there. Found radiator blowed out. Ran compression check. Found no compression on three cylinders. Removed the heads and sent to the machine shop, it had three valve seats melted. Reinstalled heads and started. Vehicle ran rough but ran.
This is were it gets tricky. Now we are showing no injector fire on Three cylinders, the same that had the valves seats melted. We had injector pulse before we started this escapade. Trace it back to the computer. Install a new computer and reflash. Vehicle started and ran rough, not as rough, but rough. Found cranksensor loosing synch. Replaced crank and cam sensor. Vehicle will not start now and is showing a secondary code for a ignition coil.
Anyone have any ideas?
- steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: 2002 Jeep Liberty - Misfire
melted or damaged seats = cylinder failure.
never argue with a fool, they'll drag you down to their level and beat you with experience
-
- 100 Club: Active Contributor
- Posts: 154
- Joined: Wed Jul 20, 2005 2:08 am
- Location: Fort Lauderdale
Re: 2002 Jeep Liberty - Misfire
So ? any fix or did it fix itself?
If they don't know how can they fix it!
Re: 2002 Jeep Liberty - Misfire
No not yet. Don't think there is a cylinder problem, we checked those pretty thorough. Got my man checking the timing marks again for the 3rd time. I don;t think that is it, just by the codes that keep coming up.
-
- 100 Club: Active Contributor
- Posts: 154
- Joined: Wed Jul 20, 2005 2:08 am
- Location: Fort Lauderdale
Re: 2002 Jeep Liberty - Misfire
What scannner are you using. Can you read the ECU in live time!
If they don't know how can they fix it!
Re: 2002 Jeep Liberty - Misfire
Tech found it out of time by two teeth. Starting but running rough. Moved two of the fuel injectors that were at the valves that melted, and misfire moved with them. Got two injectors coming in the morning.
- steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: 2002 Jeep Liberty - Misfire
sonds like this will need prayer candels and pixie dust when this finally leaves.



never argue with a fool, they'll drag you down to their level and beat you with experience
Re: 2002 Jeep Liberty - Misfire
At this point, I just want it fixed and gone. I already lost $$$. You try to trust your techs and their abilities, but these are the situation that gives you doubt. My guys are normally great. We had the timing discussion before he got into a "throw parts at it " method. It is my fault for letting him talk me into it.
Re: 2002 Jeep Liberty - Misfire - Fixed
Fixed and running like a champ
- steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: 2002 Jeep Liberty - Misfire FIXED
as an owner i'm guilty of that as well. it kinda goes with the territory. i have to rely on my techs. if i second guess them they'll start not making any diagnostic decisions. they'll wait for me...............................
never argue with a fool, they'll drag you down to their level and beat you with experience