Pin and Chip
-
- 50 Club: Regular Contributor
- Posts: 54
- Joined: Thu Apr 15, 2010 7:42 am
Pin and Chip
As credit cards are replaced with new Chip & Pin Cards, will there be a need for new equipment to handle transactions with X Charge?
- fortknoxx
- 1500 Club Master Plus Contributor
- Posts: 1873
- Joined: Wed Sep 13, 2006 6:09 am
- Location: High Point, NC
- Contact:
Re: Pin and Chip
Our cc processing unit has an add on pin pad with the chip reader. I am sure it will be available By October.
T-N-T (Tina Nuse-Tolar)
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
- fortknoxx
- 1500 Club Master Plus Contributor
- Posts: 1873
- Joined: Wed Sep 13, 2006 6:09 am
- Location: High Point, NC
- Contact:
Re: Pin and Chip
the us is going to follow europe in a credit card with a chip in it. more secure.
T-N-T (Tina Nuse-Tolar)
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
- rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
Re: Pin and Chip
Here is an explanation of what the different credit card is:brianp87 wrote:Whats a pin and chip card?
http://en.wikipedia.org/wiki/Chip_and_PIN
A year from now you will wish you had started TODAY ~ Karen Lamb
-
- 50 Club: Regular Contributor
- Posts: 54
- Joined: Thu Apr 15, 2010 7:42 am
Re: Pin and Chip
XCHARGE have made no comment on this post, so I tried calling: After 15 minutes on hold, I was put to voicemail.
My bank say new credit cards will have smart chips. They are pushing hard to sell me processing saying that after October 2015, if there are any fraudulent transactions on a non-chip/pin terminal then we are responsible?
Do we have to use XCHARGE for integrated processing with Mitchell 1?
My bank say new credit cards will have smart chips. They are pushing hard to sell me processing saying that after October 2015, if there are any fraudulent transactions on a non-chip/pin terminal then we are responsible?
Do we have to use XCHARGE for integrated processing with Mitchell 1?
- timbre4
- System Guru / Moderator
- Posts: 4502
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: Pin and Chip
Inquiry made - stay tuned please
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- timbre4
- System Guru / Moderator
- Posts: 4502
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: Pin and Chip
We have just received a fully detailed document for everyone's benefit regarding upcoming changes. It is a PDF file attached below.
We have the EMV machines and technology all set up. It should rolling out in late June.
We have the EMV machines and technology all set up. It should rolling out in late June.
- Attachments
-
- Partner Digital Comm Post.pdf
- (462.23 KiB) Downloaded 480 times
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
- fortknoxx
- 1500 Club Master Plus Contributor
- Posts: 1873
- Joined: Wed Sep 13, 2006 6:09 am
- Location: High Point, NC
- Contact:
Re: Pin and Chip
Yay June! FYI. The card must remain in the reader through out the transaction. Please remember to return the card to the customer.
T-N-T (Tina Nuse-Tolar)
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
- Rich
- 4K Ultra Amazing Contributor
- Posts: 4048
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: Pin and Chip
Thanks Tina. I was wondering how the chip could be read by swiping. My brother works on the encryption for the CC machines. I try not to ask anything work related when we are together.
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
- fortknoxx
- 1500 Club Master Plus Contributor
- Posts: 1873
- Joined: Wed Sep 13, 2006 6:09 am
- Location: High Point, NC
- Contact:
Re: Pin and Chip
The card goes inside a slot on the pin pad about 1/3 the way in. The card constantly communicates with the host during the transaction.
T-N-T (Tina Nuse-Tolar)
Gone but not forgotten...Camper Bob's
609-760-7079 Cell
Gone but not forgotten...Camper Bob's
609-760-7079 Cell