US Auto Force must have updated their software - this morning was required to change our password. Now we cannot transfer parts from their system to the Mitchell system. Is anyone else having any problems?
Becky
US Auto Force integration with Mitchell
-
rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
US Auto Force integration with Mitchell
A year from now you will wish you had started TODAY ~ Karen Lamb
-
timbre4
- System Guru / Moderator
- Posts: 4536
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: US Auto Force integration with Mitchell
Sharing with tech support to see if there are other incidents.
EDIT: "This one is 100% a vendor issue. They need to contact the vendor."
EDIT: "This one is 100% a vendor issue. They need to contact the vendor."
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
sbebenelli
- 750 Club: World Class Contributor
- Posts: 755
- Joined: Tue Dec 12, 2006 10:24 am
- Location: Iowa
Re: US Auto Force integration with Mitchell
We wasn't required to change our password and it still transfers OK for us. We use WISE connect. I assume that's what you are using.
-
rhillig
- 500 Club: Champion Contributor
- Posts: 599
- Joined: Sat May 14, 2005 11:20 am
- Location: Long Prairie, MN
- Contact:
Re: US Auto Force integration with Mitchell
Was contacted back by US Auto Force. If anyone else is forced to change the password - you have to go into the vendor set up & change the password in there as well.
A year from now you will wish you had started TODAY ~ Karen Lamb