OK, here in California we have to put the tire psi on every RO, per law. I have made it into a Standard "Note", but we still have to put in the tire psi.
Question: can Mitchell make a tire psi button similar to the "Fluids" button on the RO page? Also helpful would be torque specifications. Or maybe a "Specifications" button -- that would be awesome! I know that that information is very accessible in MotoLogic -- why can't Mitchell do something like that?
Unless it has, and we just haven't found it yet...
Tire PSI Automatic Populate?
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5985
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Tire psi automatic populate?
From Manager, you can get to wheel torque and tire pressure really quickly by clicking on the Repair Information button, then Tire Fitment button. It's only 2 clicks instead of one.
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Re: Tire psi automatic populate?
We have Manager. We don't have Pro Demand. I don't see a Repair Information button...
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5985
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Tire PSI Automatic Populate?
My apologies. I assumed you did.
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
- timbre4
- System Guru / Moderator
- Posts: 4499
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: Tire PSI Automatic Populate?
All Manager SE users have the Repair Information button up top; yours would flash a subscription notice instead of launching a ProDemand session.
This passes the Y-M-M-E (+VIN) to ProDemand to open up information for that specific Manager SE vehicle. From there you land on the 1 Search page and something like this is in the first button Common Specs and Procedures:
This passes the Y-M-M-E (+VIN) to ProDemand to open up information for that specific Manager SE vehicle. From there you land on the 1 Search page and something like this is in the first button Common Specs and Procedures:
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Re: Tire PSI Automatic Populate?
Great! I will look at that.
We are taking a look at ProDemand, as an FYI. Been long time users of AllData, so don't know what we will be doing, yet.
We are taking a look at ProDemand, as an FYI. Been long time users of AllData, so don't know what we will be doing, yet.